Viessmann 5224 - Control module for digital/analog light signals

Viessmann 5224 - Control module for digital/analog light signals

Model Details

This module features an integrated digital decoder (Märklin-Motorola, NMRA-DCC) and is used to control two light signals (one main and one distant signal) with LEDs and a common positive terminal, or incandescent lamps, provided their combined current draw does not exceed 200 mA. It offers prototypical smooth signal aspect changes. Suitable for all light signals from gauge 0 to Z (except signals with multiplex technology). Control can be achieved conventionally via push-button control panels item nos. 5545, 5546, and 5547, or directly digitally. It is equipped with the Viessmann signal bus and configurable for the following applications: - Two-aspect or multi-aspect light signal: A two-aspect main signal with the signal aspects "proceed" and "stop" requires push-button control panel item no. 5547 (for four signals) or a digital address. A 3- or 4-aspect signal with the additional aspects "Slow Speed" and "Shunting Prohibited" requires the push-button control panel Art. 5546 (3-aspect, 2 signals) or 5545 (4-aspect, 2 signals), or, in digital operation, 2 addresses. - Station signal or block signal: When configured as a block signal, the module reacts automatically to the transmitted track status. This function requires track occupancy detection with continuous contacts. Up to 2 monitored sections are necessary per signal section. In this operating mode, the module automatically switches to "Proceed" when the following section is reported as clear via the signal bus. If either of the two sections is occupied, the module switches to "Stop". - Own distant signal or distant signal on a mast: The signal module controls the main signal and the associated distant signal, or the distant signal of a following signal if it is mounted on its own mast. In this case, the distant signal is switched off prototypically when the signal is "Stop". - Interrupt track power or activate brake generator at stop: With the plug-in train control relay Art. 5228, the module can automatically stop trains. This can be done either by switching off the track power before the signal or, in digital systems, even more prototypically by switching to the brake module Art. 5232 (for Märklin-Motorola) or a brake generator (for NMRA-DCC). This enables block control in both analog and digital operation. - Coupled signal: The configuration allows you to specify whether a signal should only display stop and slow speed. In this case, the module also only requires the push-button control panel Art. 5547 or a digital address. Whether controlled via push-button control panels or track contacts, the logic in the control module ensures that if multiple buttons are pressed simultaneously, the red button always takes precedence.


Detailed scale model for adult collectors. Handle with care. Not suitable for children under 14 years. It contains small parts that may pose a choking hazard, and some components have functional sharp points. Only a toy transformer manufactured according to VDE 0570-2-7/DIN EN 61558-2-7 may be used as a power source to operate this product.

 

Characteristics:

Manufacturer:	Viessmann
Item number:	5224
number of pieces:	1 piece
EAN:	4026602052243
Product Type:	electronic accessories
track:	neutral
Age recommendation:	Ages 14 and up
WEEE No.:	DE 86057721